brother printer ink cartridge installation

If you cartridge appears to be damaged or leaking please contact us for a replacement.The compatible cartridges may look slightly different to the original cartridge.Not every printer model is listed on the box.Check you have received the right cartridges, the numbers should correspond with what is in your printer, even if the letters are different.

NOTE: Do not reset the drum counter when you only replace the toner cartridge.Installation Instructions ink cartridges Using Compatible Cartridges

Press 1, and close the front cover when the LCD shows Accepted.

Reinstall the new drum unit, keeping the front cover open.

Reinstall the toner cartridge into the new drum unit.

Place the old drum unit into the plastic bag and discard it according to local regulations.

Wait to unpack the new drum unit immediately before installing it.

Remove the old drum unit and toner cartridge assembly.

Press the cover release button and open the front cover.

When the LCD shows Accepted, close the front cover.įor DCP Series, follow these steps to replace the drum unit

To confirm you are installing a new drum, press 1, then 5.

Install the drum unit and toner cartridge assembly in the MFC (detailed instructions for installing the new drum unit in the HL series instructions).

Make sure the drum LED is off before using it.įor MFC Series, follow these steps to replace the drum unit.

Once all four LED lights are lit, release the GO button.

Press and hold the GO button for about 4 seconds until the LED lights up.

Put the drum unit and toner cartridge back into the machine, and keep the front cover open.

It should click into place with the lock lever coming back up into place.

Put the toner cartridge firmly into the new drum unit.

Remove the toner cartridge from the drum unit by pushing down the lock lever on the left side.

Take out the drum unit and toner cartridge assembly.

Install the drum unit and toner cartridge assembly into the machine.īrother Drum Unit Replacement Instruction For HL Series, follow these steps to replace the drum unit.

Return the blue tab to the Home position.

Clean the primary corona wire inside the drum unit by gently sliding the tab at the bottom of the drum unit from right to left several times.

If you put it in correctly, the lock lever will lift automatically back into place.

Insert the new toner cartridge in the drum unit until it clicks to place.

Remove the new toner from the packaging, removing the protective plastic covering to expose the drum roller.

Hold down the lock lever on the left side of the drum unit and pull the old toner cartridge out.

Brother Toner Cartridge Replacement Instruction Please remember that the instructions for installing toner cartridges and drum units can differ slightly across different Brother printer models. Included below is a printable set of instructions on how to install Brother toner cartridges and drum units.

Brother printer ink cartridge installation